Microgel for packaging is a high-performance ultra-compact
mold cooling unit. In one machine, it combines a water-
cooled chiller with a high flow and pressure booster
pump. Designed specifically f...
Water Temperature Controllers
High performance temperature control unit with Single booster pumps. Turbogel is a mold cooling unit with high flow booster pump temperature controller, specifically designed for “cycle cooling tim...
Combination OF Air cooled chiller and heated temperature control circuits
Single zone (RAM) configuration.
6 Models with nominal capacities from
1.1 to 4.2 tons (3.9 to 14.8 kW)
3 or 6 kW heater...
Air dehumidifier for mold booths.
Mold Dryer is an air dehumidifier used mainly to prevent the formation of condensation on the surface of the molds, due to the use of low temperature cooling. The ...
Temperature Control Units
600 Volt to 480Y/277. 112.5 KVA
JVC 600 Volt to 220V 175KVA
REX 600 Volt to 480Y/277V 112.5KVA
width is: 10.8” grey to grey part
length is: 194”
- Reduction of Shock and Vibration
- Prevention of Machine "Walking"
- Simplification of Machine Installation
- Elimination of Anchor Bolts
- Fast, Accurate Alignments
- Increase Equipment Life
Stock #: B0P597-
Inner case No.01-09
Inspector by Y.Matsubara
X5 stainless hopper
Stock #: B0P597
Good for 250 ton to 500 ton machine
2 levelling pads per box total 18 boxes
2 Units in stock
Electrical Safety Authority 1177377 done byElectrical Service Group x2
• 6 liter capacity stainless steel hopper
• Stepper motor
• Easy-clean design with cleanout door to drain material form hopper
LCD control with numeric keypad and 10' remote cable...
Large, Intuitive 7″ Touch Screen Color Display
Easily view, monitor and control multiple zones at once.
Simple to set-up and operate.
Data displayed in real time.
Advanced Features & Settings
air cooled chiller
Efficient and sustainable
FC version with integrated Free Cooler (saving more than 60% of energy).
Microchannel condenser and free cooler with low refrigerant charge...
Aircoil Cooling Tower
Stock #: 6763
More Info: https://baltimoreaircoil.com/products/closed-circuit-cooling-towers/fxv-closed-circuit-cooling-tower
Horizontal Injection Moulding Machines
In 2010, Shibaura Machine revolutionized injection molding with the ECSX series of all-electrics. The powerhouse of injection molding, it not only gave molders faster dry cycle times, longer mold l...
Belt conveyors are one of the most commonly used conveyors because of their versatility. With belt conveyors, product is conveyed directly on the belt or inside containers on the belt. Cleats and c...
Injection Machines Parts
Screw Tip Assy, Nissei, 45mm, 6.8" OAL Ref, 40 Deg. Nose Angle, TR26x3.0 LH Thd, H-13/HT/NIT
Air Core Pull on Fixed Platen
EURO73 Robot Interface for Side Entry
Pneumatic Hot Runner Control
EURO67 Robot Interface
Hopper: The machine is fitted with a large filling hopper and can be loaded manually, by conveyor belt or fork lift. The funnel can be adapted to suit individual requirements.
Hydraulic ram: The...