Horizontal Injection Moulding Machines
Air dehumidifier for mold booths.
Mold Dryer is an air dehumidifier used mainly to prevent the formation of condensation on the surface of the molds, due to the use of low temperature cooling. The ...
Temperature Control Units
600 Volt to 480Y/277. 112.5 KVA
JVC 600 Volt to 220V 175KVA
REX 600 Volt to 480Y/277V 112.5KVA
width is: 10.8” grey to grey part
length is: 194”
- Reduction of Shock and Vibration
- Prevention of Machine "Walking"
- Simplification of Machine Installation
- Elimination of Anchor Bolts
- Fast, Accurate Alignments
- Increase Equipment Life
Stock #: B0P597-
Inner case No.01-09
Inspector by Y.Matsubara
X5 stainless hopper
Stock #: B0P597
Good for 250 ton to 500 ton machine
2 levelling pads per box total 18 boxes
2 Units in stock
Electrical Safety Authority 1177377 done byElectrical Service Group x2
Large, Intuitive 7″ Touch Screen Color Display
Easily view, monitor and control multiple zones at once.
Simple to set-up and operate.
Data displayed in real time.
Advanced Features & Settings
air cooled chiller
Efficient and sustainable
FC version with integrated Free Cooler (saving more than 60% of energy).
Microchannel condenser and free cooler with low refrigerant charge...
Aircoil Cooling Tower
Stock #: 6763
More Info: https://baltimoreaircoil.com/products/closed-circuit-cooling-towers/fxv-closed-circuit-cooling-tower
Injection Machines Parts
Screw Tip Assy, Nissei, 45mm, 6.8" OAL Ref, 40 Deg. Nose Angle, TR26x3.0 LH Thd, H-13/HT/NIT
Air Core Pull on Fixed Platen
EURO73 Robot Interface for Side Entry
Pneumatic Hot Runner Control
EURO67 Robot Interface
7.5 Ton Demag Crane
40 ft wide
200 ft Long
height floor to top of bin is 173"
57" By 57"
56" to the Bottom of Material Drain
10 HP Pump and Filter
15 Machine load and 9 Silo unload UNA-DYN Controller
4000 LBS Pre Unit